Series PA33-8967-B

Submersible Depth / Gauge Pressure Transmitter

Brazed and welded 316L stainless steel
Pressure port all stainless steel
Fully submersible, case pressure to 350 bar (3,500 metres WG)
Gauge pressures up to 1000 bar
"Subconn" BH 4 MP connector
Digital Compensation 0.1% Total Error Band
Signal Outputs 4 to 20mA / 0 to 10V
Option of RS 485 14 bit bus compatible output (option)

The Series PA33- transmitter utilises the Keller Series 10 piezoresistive capsule.

The all welded diaphragm and body are 316 stainless steel as standard.
The "Subcon" connector is designed for underwater applications. Other proprietary connectors can be specified.
Digital Compensation techniques give a Total Error Band of ±0.1% over the temperature range of 0..+50°C, and a NL&H of 0.05% (typical)
Case pressure has no effect on the output signal. Gauge pressure ranges go up to 1000 bar. Depth ranges up to 300 bar (~3,000 metres WG)

Specification of the Series Series PA33-8967-B Submersible Depth / Gauge Pressure Transmitter

Ranges
Gauge Pressure (bar SG):	0 to 100	0 to 300	0 to 500	0 to 1000
Maximum Overpressure (bar G):	250	450	750	1100
Maximum External Case Pressure (bar G):	350

Signal Options
2 wire:	Excitation: 9 - 30V Signal output: 4 - 20 mA
3 wire:	Excitation: 13 - 30V Signal output: 0 - 10V
3 wire:	Excitation: 8 - 30V Signal output: 0 - 5V (non-standard)
3 wire:	Excitation: 9 - 30V Signal output: 0 - 20mA (non-standard)
Optional Digital Output:	RS 485 14 bit / ½ duplex / 9600 baud

Also Available:	RS232/485 converter PROG30 and READ30 software for up to 10 transmitters for BUS-capable operation.

Back to the MSI Scantech products index

MSI Scantech Products
The Centre, Reading Road, Eversley, Hampshire, RG27 0NB, United Kingdom
Telephone: +44 (0)118 973 0200 Facsimile +44 (0)118 932 8872

web site designed and maintained by adey.com